Serving the Cedar Rapids area  ·  (319) 261-9587  ·  Open Mon-Sun 7am-7pm
📞 (319) 261-9587 Free Quote

Metal Roofing in Cedar Rapids, IA (52401) · Local Professionals

Cedar Rapids Metal Roofing · Fast response in Cedar Rapids and the Cedar Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cedar Rapids is a city of old trees and older roofs. From the brick foursquares of Wellington Heights to the low-slung ranches of Kenwood Park, most homes here have seen decades of hail, straight-line wind, and freeze-thaw cycles that work nails loose and open seams. The 2020 derecho left its mark on nearly every block, and the emerald ash borer has been taking down the shade canopy that once protected those roofs.

Homeowners in ZIP 52401 and across the city call Cedar Rapids Metal Roofing because we know what local weather does to a roof. We have replaced standing seam panels in Bever Park, repaired wind-lifted corrugated roofing near Czech Village, and stopped ice dams on Victorians in Time Check. When you need a roof that can handle an Iowa sky, we are the crew that shows up.

Metal Roofing in Cedar Rapids (52401)

The housing stock here asks a lot of a roofing crew. In Wellington Heights and the streets around Bever Park, you are working on steep Victorian and Queen Anne pitches with ornate trim and deep porches, where flashing details matter more than panel count. Out in Kenwood Park and Oakhill Jackson, the low-pitch ranches and Cape Cods often have just a few layers of shingles left before a retrofit is the smarter move. And on the newer subdivision homes in Marion, Hiawatha, and Robins, HOA design review can dictate panel profile and color before a single screw goes in.

The ground is another factor. Cedar Rapids sits on deep dark loam along the Cedar River floodplain, and after a wet spring, a loaded dumpster or a lift can sink where you least expect it. We plan access and staging around that, especially on the tight lots near NewBo and Czech Village. Our team has been installing, repairing, and replacing metal roofs across Cedar Rapids and the surrounding areas for years, and we have seen how hail bruises stone-coated steel, how wind peels back fasteners on ribbed panels, and how ice dams form at the eaves on high-elevation homes. We bring that experience to every free inspection.

Our services in Cedar Rapids

How a Job Works in Cedar Rapids

Step 1: You call us at (319) 261-9587 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and seams, and take photos. You get a written scope and a clear price before any work starts, whether it is a full replacement or a leak repair.

Step 2: We handle the details that slow down local jobs. That means pulling the roofing permit with the City of Cedar Rapids through the proper channels, coordinating with your HOA if you are in a subdivision with design review, and staging materials so we do not block a narrow street in Wellington Heights or tear up a lawn in Kenwood Park. If your home is in a historic district, we confirm what panel profiles and colors are allowed before we order.

Step 3: Cleanup is part of the job. We tarp landscaping, run magnetic sweeps for nails, and haul away old shingles and metal scrap. Before we leave, we walk the property with you, show you the finished work, and make sure you know how to reach us if anything comes up. We leave your property clean and your roof ready for the next Iowa storm.

Pricing in Cedar Rapids depends on the size and pitch of your roof, access, the condition of the decking, and how soon you need us. For a typical residential job, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but code limits how many layers can stay. Smaller jobs like metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (319) 261-9587 for a free estimate and a straight answer.

My 1920s foursquare in Wellington Heights has a steep roof and original trim. Can you install standing seam without destroying the details?
Yes. Steep pitches and ornate trim are common in Wellington Heights, and we plan the flashing and panel layout around the existing fascia, soffit, and porch roofs. We use custom-bent trim where needed and take care not to damage the historic woodwork. We also check whether your block falls under historic district review before we order materials.
A storm just peeled back panels on my barn near Mount Vernon. How fast can you get out for storm and wind damage repair?
We offer free inspections for storm and wind damage and prioritize active leaks and exposed decks. Call (319) 261-9587 and we will schedule the soonest available assessment, often within a day or two depending on weather and workload. We document the damage for your insurance claim and can tarp or secure the roof if more rain is coming.
What does a metal roof over shingles cost for a ranch in Kenwood Park?
Retrofit over existing shingles starts at $7 per square foot, but the final price depends on the number of existing layers, the condition of the deck, and the panel type. A typical ranch may need some deck repairs once the old shingles are exposed. We give you a written estimate after a free inspection, and we confirm local code limits on layers before recommending a retrofit.
Do I need a permit for a metal roof replacement in Cedar Rapids, and how do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction. We pull the permit and coordinate inspections as part of the job. You can also check the City of Cedar Rapids website for general information, but always confirm the current rules with the local building department before work begins.
My HOA in Marion has design rules. Can you help get approval for a standing seam roof?
We can. HOA design review often restricts panel profile, color, and sometimes even the visibility of fasteners. We provide product specs, color samples, and installation details for your HOA submission, and we schedule the work around their approval timeline. If your neighborhood has architectural review, let us know at the estimate so we can plan for it.
Are you insured for work on my property, and what coverage do you carry?
We are fully insured, with general liability and workers' compensation coverage. That protects your property and our crew.
What should I do about ice dams on my roof near the Cedar River floodplain?
Ice dams form when heat escapes through the roof and melts snow that refreezes at the eaves. On older homes with limited insulation, this can back water under the panels and into the house. We inspect the attic ventilation, flashing, and eave details, and we can install snow guards and ice protection starting at $1,200. A spring inspection after a heavy winter is the best way to catch small problems before they become leaks.
Why choose us?

Trusted professionals in Cedar Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cedar Rapids

All your work handled by qualified professionals in Cedar Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Cedar Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cedar Rapids · Response within 24h · No commitment · ☎ (319) 261-9587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cedar Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm