Serving the Cedar Rapids area  ·  (319) 261-9587  ·  Open Mon-Sun 7am-7pm
📞 (319) 261-9587 Free Quote

Metal Roofing in Coralville, IA (52241) · Local Professionals

Cedar Rapids Metal Roofing · Fast response in Coralville and the Cedar Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Coralville's mix of 1970s ranches near the Iowa River and newer townhomes off 2nd Street means one thing for roofs: hail and wind don't care about your zip code. From the established streets near the Coral Ridge Mall to the growing subdivisions along Oakdale Boulevard, we see the same problems repeat, and we know how to fix them for good.

Homeowners in 52241 call Cedar Rapids Metal Roofing because we understand the local building stock, from low-slope ranch roofs that need proper ventilation to townhome complexes where HOA rules dictate panel profiles. We're based just up I-380 in Cedar Rapids, so we're on-site fast when a storm rolls through.

Metal Roofing in Coralville (52241)

Coralville sits on rolling terrain that drains toward the Iowa River, and that matters for your roof. Many homes here have walkout basements and steep back yards, so we often deal with tight access on the downhill side and need to plan staging carefully. The older ranches and split-levels near the Coralville Public Library and along 5th Street tend to have low-pitched roofs with minimal attic ventilation, which can shorten the life of any roofing material. Newer townhomes and two-story homes closer to the Coral Ridge Mall often have complex rooflines with multiple valleys and transitions, where flashing details make or break a leak-free install. We also see a lot of mature trees, especially silver maples and walnuts, that drop limbs and fill gutters, so we always check for proper gutter sizing and snow guard placement.

Our team has worked throughout Coralville and the surrounding areas, from the homes near the Iowa River Power Restaurant to the fast-growing neighborhoods off Forevergreen Road. We know the local inspectors, the common code requirements, and the weather patterns that cause the most damage.

Our services in Coralville

How a Job Works in Coralville

Step 1: You call us at (319) 261-9587 or request a free estimate online. We schedule an on-site assessment, usually within a day or two, and walk your roof with you. We check for hail damage, wind-lifted panels, failed fasteners, and flashing issues, and we take photos so you can see exactly what we see. If it's an insurance claim, we document everything you'll need.

Step 2: Once you approve the scope and price, we pull the required permits from the City of Coralville building department. We schedule the work around your timeline, and we coordinate with your HOA if you're in a townhome or planned community. On installation day, we protect your landscaping, keep the site organized, and work efficiently. For tight lots or steep grades, we use specialized equipment to move materials safely without damaging your yard or driveway.

Step 3: After the work is done, we do a full cleanup, including a magnetic sweep for nails and a final walkthrough with you. We don't leave until you're satisfied and we've reviewed the workmanship warranty and maintenance tips for your new metal roof.

Pricing for metal roofing in Coralville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We always provide a free estimate with a clear breakdown, so call (319) 261-9587 to get started.

My ranch home near the Coralville Public Library has a low-pitch roof. Can metal roofing work on it?
Yes, but it depends on the panel type and seam method. Low-slope roofs often need standing seam panels with raised seams or a specific underlayment to prevent leaks. We'll assess your roof pitch and recommend the right system, whether that's standing seam or a corrugated panel with proper overlap.
How fast can you respond to storm damage in Coralville?
We prioritize emergency calls after storms. If you have an active leak or wind damage, call (319) 261-9587 and we'll schedule an inspection as soon as possible, often the same day or next. We'll tarp if needed and provide a written estimate for repairs.
What's the typical cost for a metal roof replacement on a 1,500-square-foot ranch in Coralville?
For a basic metal roof replacement, you're looking at roughly $9 to $12 per square foot installed, so around $13,500 to $18,000 for 1,500 square feet, depending on material and roof complexity. Standing seam or stone-coated steel will be on the higher end. We'll give you an exact quote after inspecting your roof.
Do I need a permit for a metal roof in Coralville?
Yes, most full replacements and re-roofs require a permit from the City of Coralville. Requirements vary by project, so we handle the permitting process for you and ensure the work meets local code, including historic district or HOA design review if applicable.
My HOA requires a specific roof color. Can you help with approval?
Absolutely. We work with many HOAs in Coralville and can provide material samples and documentation for your architectural review. We'll coordinate with your HOA board to make sure the panel profile and color meet their guidelines before we order materials.
Are you fully insured for work at my Coralville property?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Coralville's climate?
Metal roofs are low maintenance, but we recommend annual inspections, especially after hail or wind storms. Check for loose fasteners, debris in gutters, and snow guard condition before winter. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Cedar Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cedar Rapids

All your work handled by qualified professionals in Cedar Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Cedar Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cedar Rapids · Response within 24h · No commitment · ☎ (319) 261-9587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cedar Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm