Serving the Cedar Rapids area  ·  (319) 261-9587  ·  Open Mon-Sun 7am-7pm
📞 (319) 261-9587 Free Quote

Metal Roofing in Hiawatha, IA (52233) · Local Professionals

Cedar Rapids Metal Roofing · Fast response in Hiawatha and the Cedar Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hiawatha is a town of mid-century ranches and split-levels, many built between the 1960s and 1990s, sitting on generous lots just north of Cedar Rapids. The low-pitch roofs on these homes were often shingled, and after 30 or 40 years of Iowa weather, they are ready for an upgrade. If you live near Guthridge Park or along North Center Point Road, you have probably seen neighbors switching to metal.

Homeowners in Hiawatha (52233) call Cedar Rapids Metal Roofing because we understand the specific needs of these older homes. We specialize in metal roof over shingles (retrofit) and storm and wind damage repair, which are exactly the services that Hiawatha's housing stock demands. Our team is based in Cedar Rapids, just minutes away, so we can respond quickly when a storm rolls through.

Metal Roofing in Hiawatha (52233)

Hiawatha's terrain is mostly flat to gently rolling, with deep dark loam that can hold moisture after heavy rain. Many properties have mature trees, including burr oaks and silver maples, which drop limbs and fill gutters. The low-pitch roofs common on 1960s-90s ranches and split-levels are prone to ice damming at the eaves and wind uplift during straight-line wind events. We often recommend standing seam or corrugated panels for these homes because they shed snow and water efficiently. Access can be tight in some of the older subdivisions, with narrow driveways and mature landscaping, so we plan each job carefully to avoid damage.

Our team has years of experience serving Hiawatha and the surrounding Cedar Rapids area. We know the local building department's permit requirements and can help you navigate the process. Whether you need a full replacement or a repair after a storm, we bring the right materials and expertise to get the job done right.

Our services in Hiawatha

How a Job Works in Hiawatha

Step 1: It starts with a phone call to (319) 261-9587 or a request through our website. We schedule a free on-site assessment at your Hiawatha property, where we inspect your roof, discuss your options, and provide a written estimate. We will also check for any storm damage that might be covered by insurance.

Step 2: Once you approve the estimate, we pull the necessary permits from the city of Hiawatha and schedule the work. On installation day, our crew arrives on time and protects your landscaping. For retrofits over existing shingles, we verify that your roof meets code requirements for the number of layers. We coordinate with any HOA requirements and keep you informed throughout the process.

Step 3: After the work is complete, we clean up thoroughly, using magnets to pick up nails and debris. We walk the property with you to ensure you are satisfied and answer any questions. We leave your yard as clean as we found it, or better.

Pricing for metal roofing in Hiawatha depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles (retrofit) at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening at $750. For a precise estimate tailored to your home, call us at (319) 261-9587. We offer free estimates and transparent pricing with no surprises.

My Hiawatha ranch has a low-pitch roof that gets ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow more effectively than shingles, especially when paired with proper attic insulation and ventilation. For low-pitch roofs common in Hiawatha, we often recommend standing seam panels with a raised seam profile that prevents water from backing up. We can also install snow guards and ice protection to further reduce the risk.
A storm just knocked a limb onto my roof in Hiawatha. How quickly can you respond for emergency repair?
We prioritize storm damage calls in Hiawatha and the surrounding area. Call us at (319) 261-9587, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp the affected area to prevent further water intrusion and provide a detailed repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Hiawatha?
For a 1,500-square-foot ranch with a simple gable roof, a metal roof replacement might range from $12,000 to $18,000, depending on the material and whether we remove the old shingles. Retrofit over existing shingles can be less. We provide a free estimate after inspecting your roof.
Do I need a permit for a metal roof installation in Hiawatha?
Yes, the city of Hiawatha requires a roofing permit for most replacements and re-roofs. Requirements vary, so we always check with the local building department before starting work. We handle the permit application and ensure the job meets all code requirements.
My HOA has design guidelines. Can you help with approval for a metal roof in Hiawatha?
We can provide material samples and documentation to help you get HOA approval. Some HOAs restrict panel profiles and colors, so we will work with you to choose an option that meets the guidelines. We also ensure the installation respects property lines and setback rules.
Are you insured for roofing work at my Hiawatha home?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property is protected throughout the project.
What maintenance does a metal roof need in Hiawatha's climate?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after winter, to check for loose fasteners, debris accumulation, and sealant condition. Cleaning gutters and removing fallen leaves and branches helps prevent clogs and water damage. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Cedar Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cedar Rapids

All your work handled by qualified professionals in Cedar Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Cedar Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cedar Rapids · Response within 24h · No commitment · ☎ (319) 261-9587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cedar Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm